Hinweis: Dieses Produkt wurde mit November 2020 eingestellt.
Nachfolgeprodukt mit noch besserer Präzision und 7 auswechselbaren Modulen:
WT5000 PräzisionsLeistungsanalysator
WT3000E PräzisionsLeistungsanalysator
Mit einer Grundgenauigkeit von 0,01 % ermöglicht der WT3000E reelle Einsparungsmöglichkeiten vor allem für TransformatorHersteller.
Geräte, wie Solarwechselrichter, erreichen bereits heute einen Gesamtwirkungsgrad von 90 bis 96 %. Die weitere Erhöhung des Wirkungsgrads, wenn auch nur um wenige Dezimalpunkte, ist eine große Herausforderung und ein wichtiges Ziel für die Hersteller.
Als weltweit genauester Leistungsanalysator gewährleistet der WT3000E die erforderliche Präzision, um selbst kleinste Effizienzverbesserungen sicher nachweisen zu können.
Details
Features
With basic power accuracy of ±0.01% reading, DC and 0.1 Hz1 MHz measurement bandwidths, and up to four input elements, the WT3000E provides higheraccuracy measurement of I/O efficiency.
 Basic power accuracy: 0.01% of reading
 Both 2 A and 30 A input elements can be installed in a single unit
 Good readability: The large, 8.4inch LCD and the range indicator LEDs
 Simultaneous measurement with 2 units (8 power input elements)
 Store function: 50 ms data storing interval
 Interface: GPIB, Ethernet, RS232 and USB
 Advanced computation function: Waveform computation, FFT analysis, waveform sampling data saving.
 The latest IEC6100032 and IEC61000312: Harmonic measurement
 The latest IEC6100033 and IEC61000311: Voltage fluctuation / flicker measurement
Yokogawa's highestprecision power analyzer The WT3000E has the highest precision of all the Yokogawa power analyzers in the WT series. The models in the WT series are designed to meet a wide variety of user needs. The WT300/WT500 series is a high priceperformance series which is very popular in production line applications. The WT1800 allows measurement data to be viewed in a variety of ways, including numerical value display, waveform display, and trend display capabilities. 
Select the model most suited to your measurement needs

High accuracy and wide frequency range
Basic power accuracy
±(0.01% of reading + 0.03% of range)
frequency range
DC, 0.1 Hz to 1 MHz 
Low power factor error
Power factor error when cosø=0
0.03% of S
S is reading value of apparent power
ø is phase angle between voltage and current 
Current range
Direct input
0.5/1/2/5/10/20/30 [A] or 5/10/20/50/100/200/500 [mA], 1/2 [A]
*2A and 30A input elements can be installed together in a unit. 
External input
50m/100m/200m/500m/1/2/5/10 [V]*

Voltage range
15/30/60/100/150/300/600/1000 [V]
* Voltage range and current range are for crest factor 3 1000 [Vrms] Continuous maximum common mode voltage (50/60 Hz)
 Data Update rate: 50 ms to 20 sec
 Effective input range: 1% to 130%
 Simultaneously measurement with 2 Units
Motor Evaluation Option (/MTR)

Rear Panel
Standard Features  Optional Features 


Characteristics
Example of basic characteristics showing the WT3000E’s high precision and excellent stability
Supports Crest Factor 6
The crest factor is the ratio of the waveform peak value and the RMS value. 
When checking the measurable crest factor of our power measuring instruments, please refer to the following equation.
* However, the peak value of the measured signal must be less than or equal to the continuous maximum allowed input
* The crest factor on a power meter is specified by how many times peak input value is allowed relative to rated input value. Even if some measured signals exist whose crest factors are larger than the specifications of the instrument (the crest factor standard at the rated input), you can measure signals having crest factors larger than the specifications by setting a measurement range that is large relative to the measured signal. For example, even if you set CF = 3, CF5 or higher measurements are possible as long as the measured value (RMS) is 60% or less than the measuring range. Also, for a setting of CF = 3, measurements of CF = 300 are possible with the minimum effective input (1% of measuring range).
Store Function (Comes Standard with WT3000E)
Voltage, current, power, and other measured data can be stored to the unit's approximately thirty megabytes of internal memory. These data can be saved in binary or ASCII format on a PC card or USB memory*.
* The USB port (for peripherals) comes with the /C5 option.
Each measured item can be stored every data update interval. You can specify to store only the desired measured items, thus saving memory.
Files saved in ASCII format can be opened in generalpurpose applications such as Excel allowing display of data in graphs. * Please note that data saved in binary format can only be manipulated using dedicated software to be made available by Yokogawa.  Excel Example 
Functions
Delta Calculation Function
Checking phase voltage when you measure line to line voltage
This function allows you to calculate individual phase voltages from the line voltage measured in a threephase, threewire (3V3A) system. RS line voltage can be calculated in systems measured from a threephase, threewire method (using two elements). This is useful when you want to determine the phase voltage in motors and other items under test with no neutral lines. Line to line voltage and phase current (measurements equivalent to 3V3A) can be estimated in systems not measured from a threephase, threewire configuration (using two elements). 
Cyclebycycle Measurement Function
With fluctuating data occurring when connecting to interconnected systems, or with motor evaluation*, in certain circumstances you may need to capture rapidly changing phenomena (such as during load fluctuations in a motor). These tasks can be handled effectively with the cyclebycycle measurement function. The function takes measurements of parameters such as voltage, current, and active power for each cycle, then lists the data on screen in a time series. Up to 3000 data (measurements of signals from 0.1 Hz to 1000 Hz) can be saved in CSV format. * Requires the motor evaluation option (/MTR)  Example of calculation with the cyclebycycle function 
Range settings using direct key input
Simpler range settings
The range indicator on the WT3000E is a sevensegment green LED, so the set range can be monitored at all times. The range can easily be switched using the up and down arrows. 
Intuitive control using cursor keys
Easier cursor navigation and numerical settings Cursor keys can be used to move the screen cursor in four different directions, so it is easy and intuitive to set scaling factor and other settings. 
Using item pages to set display preferences
Item pages make it easy to set the data you want to view for each experiment
The WT3000E has nine item pages for displaying measurement values. Once you set the measurement parameters you want displayed on a particular item page, you can easily switch between entire groups of displayed parameters. For example, the following settings make it easy to switch and compare data:
Page 1: Voltage, current, active power, and current frequency for input element 1
Page 2: Voltage, current, active power, and current frequency for input element 2
Page 3: Voltages for input elements 1, 2, 3, and 4
Page 4: Currents for input elements 1, 2, 3, and 4
Page 5: Power for input elements 1, 2, 3, and 4
A Variety of display formats
Formats for viewing waveforms as well as numerical values
The WT3000E lets you display input signal waveforms in addition to numerical value data. This means you don't need to connect a special waveform analyzer just to check signal waveforms. 1 In addition, the optional advanced calculation function lets you display vectors and bar graphs for enhanced visual presentation. The information display shows voltage range, current range, filter, and scaling value all together, making it easy to check your settings. 2 1 Waveforms up to approximately 10 kHz can be displayed accurately. 2 More than 2 sets of same type input elements are required. 
50ms data updating intervals
Highspeed measurement to capture rapid data fluctuations
Fast updating allows you to precisely capture rapidly changing transient states in the measurement subject.
* The WT3000E switches between two different calculation systems depending on the data updating interval. See page other for details.
Compensation functions
For increased measurement precision
The WT3000E has compensation functions for highprecision measurements. These functions can compensate for instrumentrelated losses resulting from the power meter’s internal impedance as well as losses related to wiring during measurement with two power meters. The following compensation functions are provided to compensate for instrumentrelated losses:
 Efficiency compensation: This function compensates for instrumentrelated losses occurring during efficiency calculation.
 Wiring compensation: This function compensates for instrumentrelated losses caused by wiring.
When measurements are performed using two power meters with threephase threewire wiring, errors may occur if current flows to the middle wire (or if there is a leakage current). The WT3000E has a function to compensate for such errors. Even when measurements are performed with two power meters (requires measurement with threephase threewire (3V3A) wiring), the current flowing to the middle wire is calculated, and a corresponding correction value can be added to the power measurement. This improves the accuracy of power measurements.
Userdefined function
A way to add userdefined measurement parameters
As many as twenty userdefined formulas can be set in the WT3000E. These equations can be used to calculate various parameters, such as mean active power (see "A variety of integration functions" below).
Efficiency calculation function
An easier way to input efficiency calculation formulas
This function can be used to set up to four efficiency calculation formulas.
A Variety of integration functions
Apparent power integration and reactive power integration
 Active power, current, apparent power, reactive power
In addition to the active power integration function (WP) and current integration function (q) included in earlier models, the WT3000E also has a new apparent power integration function (WS) and reactive power integration function (WQ).  A wide effective input range for highprecision integration
The WT3000E has a wide effective input range, from 1% to 130% of the measurement range. This enables higherprecision integration measurements on measurement subjects with current values that fluctuate widely from large currents down to faint currents in the standby state.  Mean active power (using userdefined settings)
Mean active power can be calculated over an integration interval. This feature is useful for evaluating the power consumed by intermittentcontrol instruments in which the power value fluctuates.
Options
A wide variety of optional functions make it easy to perform sophisticated power evaluations.
When you purchase a WT3000E from Yokogawa, you get to select just the options you need. This approach lets you maximize performance at a lower cost.
Advanced Calculation Function (/G6 option)
The Advanced Calculation Function (/G6 option) provides for wide bandwidth harmonic measurement, IEC compliant harmonic measurement (requires harmonic measurement software), FFT calculation, waveform calculation functions, and saving of waveform sampling data.
Wide Bandwidth Harmonic Measurement Mode
Harmonic measurement for a frequency range of 0.1 Hz – 2.6 kHz
Enables harmonic measurement over wide bandwidths. Supports measurement of harmonic signals beyond those of the harmonic measurement function in normal measurement mode. This option allows for harmonic analysis on waveforms with a fundamental frequency range of 0.1 Hz–2.6 kHz (*1). You can measure up to the 50th order harmonic at 1 kHz fundamental.(*2).
*1 0.1–10 Hz using an external sampling clock.
*2 Harmonic measurement of up to the 20th order possible in the 1 kHz to 2.6 kHz range.
Harmonic Measurement Function
Harmonic and normal power parameters measurement at same time
This function enables simultaneous measurement of normal and harmonic data, which was impossible with previous Yokogawa models. Since with the WT3000E you can simultaneously confirm total voltage and current as well as the distortion factor and fundamental wave without switching modes, this allows for more accurate and efficient measurement of the power supply quality, the fundamental wave of motor drive voltage, and other factors.
IEC Harmonic Measurement Mode
Can perform tests conforming to international standards.
The IEC harmonic measurement mode meets the window width requirement of the latest IEC harmonic standard (10 cycles of 50 Hz and 12 cycles of 60 Hz). Also, this mode allows users to use the 761922 harmonic measurement software to perform tests conforming to IEC 6100032 and IEC61000312.
* These modes cannot be used at the same time.
FFT Calculation Mode
More detailed frequency analysis than with the harmonic measurement mode.
Two FFT calculations can be performed simultaneously on waveform data of measured voltage and current. You can select a resolution for FFT of 1 Hz or 10 Hz. FFT analysis of up to 100 kHz can be performed.
Waveform Calculation Mode
Monitoring of instantaneous power waveforms.
Up to two waveform calculations and other Waveform Calculation functions can be used at once. If you create a formula that multiplies voltage and current waveforms, you can confirm an instantaneous power waveform on screen. Waveform Calculation data can be saved in CSV or WVF format.
Waveform Sampling Data Saving Function
Saving of detailed waveform data for confirmation.
All captured voltage and current waveform data (200 kS/s), calculated waveforms, and FFT calculated waveforms can be saved. You can choose to save in CSV or WVF format, and to save to PC card or USB memory (/C5 option).
Added Frequency Measurement (/FQ)
Checking the frequencies of all inputs
In addition to the standard two channels of frequency measurement, a sixchannel frequency measurement option is also available. This option provides frequency measurement of voltage and current on all eight channels (with input elements 1 through 4 installed). This is necessary when you want to measure voltage and current frequency from the instrument’s I/O as well as voltage and current frequencies of multiple items under test at the same time.
D/A Output (/DA)
Outputting measurement values as analog signals to other devices
 20 channels
Measured valuescan be output as ±5V 5V FS DC voltages from the D/A output connector on the rear panel. Measured parameters can be output on up to twenty channels simultaneously. Even with four input elements installed, you can send up to five types of data per element to D/A output.  D/A zoom
Normally the D/A output function outputs DC voltage scaled to a range of 5V to 5V* with respect to the measurement range. For this reason, it may not be possible to observe fluctuations in a nearly constant signal if the D/A output is set to go to ±5V at the measurement range rated value. One case in which this could happen is when a 100V measurement voltage fluctuates in the range of ±3V.
The WT3000E has a D/A zoom function to solve such problems. This function allows the any input signal range to be scaled to between 5V and 5V* in the D/A output as Upper and Lower ranges. This makes it possible to enlarge input signal fluctuations for observation using a recorder or logger.
* The range is 0V to 5V for some functions, such as frequency measurement
Builtin printer(/B5)
Output graphics at the touch of a button
The optional builtin printer is installed on the front side of the WT3000E, so it is easy to use even if the WT3000E is mounted on a rack. The printer can be used to print data and waveform memos. 
Auto Print Function
The Auto Print function allows you to set a time interval at which measured values are automatically printed on the builtin printer. You can also set a start and stop time in order to record data over a desired time period. You can also specify to print only the desired measured items.
VGA output (/V1)
Video output for viewing on a larger screen
The VGA port can be used to connect an external monitor in order to view numerical value data and waveforms on a larger screen. This capability is useful if you want to simultaneously check large amounts of data on a separate screen, or view data in a separate location.
Serial (RS232) (/C2)
USB Port for Peripherals (/C5 Option)
A USB port for peripherals with type A connectors can be included with the WT. The various kinds of data stored in the main unit such as voltage, current, and power, can be saved in binary or ASCII format on a peripheral such as a USB memory. You can also connect a keyboard for easy input of userdefined math expressions. 
USB Port for Connection to PC (/C12 Option)
The USB port (type B connector) on the rear panel of the WT3000E allows data communications with a PC¹. Also, instruments with this option installed can be used in conjunction with the communication functions of PC application software for data acquisition via USB².
 USB driver required for USB communications. A USB driver is available for download from our Web site.
 USB cable for connection to PC not included.
* USB stands for universal serial bus. USB is a standard designed to provide connectivity across a wide range of PC peripherals and other devices through the use of a common communication mechanism.
Ethernet Communication Function (/C7 Option)
The option conforms to 100BASETX and 10BASET and provides for data exchange via communications. The option supports file transfers via FTP server, as well as FTP client (network drives), LPR client (network printers), and email (SMTP client) functions.
* The WT3000E does not have a builtin hard disk. The FTP server function is available when a PC card or USB memory is inserted or connected to the PC.
Flicker measurement (/FL)
This function enables measurement of voltage fluctuations/flicker in compliance with EN6100033 and IEC61000311. It can measure relative working voltage change, maximum relative voltage change (dmax), relative voltage change time (dt), shortterm flicker value (Pst), and longterm flicker value (Plt). The initial limit values for the individual parameters are set in accordance with the IEC standard.
IEC6100032, IEC61000312, JIS C 3100032
(Advanced Calculation Function /G6 and software for testing standards compliance)
IEC6100033, IEC61000311
(Voltage fluctuation/flicker measurement, with the /FL option)
Support for IEC and JIS Standards Testing
Modellnummern
Modell  Beschreibung 

WT3001E  PräzisionsLeistungsanalysator mit einem Eingangselement 
WT3002E  PräzisionsLeistungsanalysator mit zwei Eingangselementen 
WT3003E  PräzisionsLeistungsanalysator mit drei Eingangselementen 
WT3004E  PräzisionsLeistungsanalysator mit vier Eingangselementen 
Downloads
Download – Beispielzertifikat
Beschreibung  Downloadinfo 

Example ISO17025 calibration certificate  WT3001E2A030A1F/G6  163.67 KB 
Zubehör
BNCShuntAufsteckshunts werden eingesetzt, um mit Leistungsmessgeräten die Ströme über die BNCEingänge zu messen.  
B9284LK Externes SensorkabelExternes Sensorkabel  
B9316FX DruckerpapierRolleDruckerpapierRolle  
366924 BNC KabelBNCBNC 1 m (366924) and 2 m (366925)  
758917 MessleitungsSetEin Set mit 0,8 m langen roten und schwarzen Messleitungen.  
758921 KabelschuhAdapterKabelschuhAdapter für den Anschluss eines 4 mm Bananensteckers.  
758922 Kleine KrokodilklemmenSpezifiziert für 300 V.  
758923 SicherheitsanschlussSetSet bestehend aus zwei Adaptern.  
758924 ZwischensteckerPasst zwischen BNC und BananensteckerKupplung.  
758929 Große KrokodilklemmenSpezifiziert für 300 V.  
701960 Kompakter LaborwagenKompakter Laborwagen  
701961 Deluxe LaborwagenDeluxeLaborwagen 570 mm (B) x 580 mm (T) x 839 mm (H)  
701962 Universeller LaborwagenAllpurpose instrument cart 467 mm (W) x 693 mm (D) x 713 mm (H) 