Vibrations- und Drucksensoren für hohe Temperaturen

Viele der Sensoren (Models EX600B1X, 357A100, 357E9X, EX611AX0, 176MXX und 176AXX) sind mit der neuen UHT-12™ (Ultra-High-Temperature) Technik mit folgenden Vorteilen ausgestattet:

  • keine pyroelektrischen Rauschspitzen bis zu 650 ºC
  • Empfindlichkeit ist über einen großen Temperaturbereich konstant
  • niedriger Temperaturkoefzient
  • integriertes Tiefpassfilter
  • Masseisoliert
  • keine Verringerung des Sauerstoff bei hohen Temperaturen,
    dadurch ist keine Öffnung oder Ventilation für das Gehäuse notwendig

Videos

UHT-12™ Extreme Temperature Accelerometers

UHT-12™ is a new crystal designed for more accurate, lower noise measurements during large temperature variations and trusted in the most demanding test environments.

PCB® sensors made with UHT-12™ technology have an improved data quality compared to ceramic crystal designs.

For more Information, please visit: www.pcb.com

Ultra High Temperature Accelerometers for Aerospace Propulsion

UHT-12 is a new crystal designed for more accurate, lower noise measurements during large temperature variations.

For more Information, please visit: www.pcb.com

High Temperature Sensor Validation with Portable Vibration Calibrator

Are you throwing away valuable budget? Recalibrate your high temp vibration sensors on time and on site with IMI’s Portable Vibration Calibrator Model 699A07.

Learn more below about sensor validation and producing calibration reports that can streamline both your budgetary and audit processes.

For more Information, please visit:

High Temperature ICP® Accelerometers

  • ICP® Accelerometers (162 °C)

    • 100 mV/g, ±50 g pk: Models HT602D01, HT628F01

  • Charge Accelerometers (260 °C / 288 °C)

    • Sensitivity:
        20 pC/g (357B81)
        50 pC/g (357B82) or
      100 pC/g (357B53, 357B54, 357B83 and EX615A42)
    • Measurement Range:
      ±150 g (357B53 and 357B54),
      200 g (EX615A42)
      500 g (357B83)
      1000 g (357B82) or
      2000 g pk (357B81)

  • Charge Accelerometers with Integral ICP® Amplifier (482 °C)

    • Sensitivity:
        10 mV/g (EX600B14) or
      100 mV/g (EX600B13)
    • Measurement Range:
      ±50 g (EX600B13) or
      500 g pk (EX600B14)

  • Charge Accelerometers (482 °C)

    • Sensitivity:
          3.5 pC/g (357B69)
          5.0 pC/g (357A100)
        10 pC/g (357C71, EX357C71 and 357B61),
        50 pC/g (357C72, EX357C72 and EX619A11) or
      100 pC/g (357C73)
    • Measurement Range:
      ±200 g (357A100)
      ±300 g (357C73)
        500 g (357C72, EX357C72, 357B69 and EX619A11) or
      1000 g pk (357C71, EX357C71 and 357B61)

  • Charge Accelerometers (649 °C)

    • Sensitivity:
        2.3 pC/g (357E92 and 357E93)
        5 pC/g (357E90 and 357E91) or
      10 pC/g (EX611A00)
    • Measurement Range:
      ±200 g (EX611A00) or
      1000 g pk (357E9X)

High Temperature Pressure Sensors

  • Charge Pressure Sensors (260 °C / 350 °C)

    • Sensitivity:
           15.5 pC/psi (176A04) or
      1,100 pC/psi (EX171M01)
    • Measurement Range:
        10 psi pk (EX171M01) or
      300 psi (176A04)

  • Charge Pressure Sensors (520 °C / 530 °C)

    • Sensitivity:
      17 pC/psi (176M03, 176M07, 176M09 and 176M12) or
      52 pC/psi (176A05)
    • Measurement Range:
      20 psi (176M03, 176M07, 176M09 and 176M12) or
      75 psi pk (176A05)

  • Charge Pressure Sensors (649 °C)

    • Sensitivity:
        6 pC/psi (176A02) or
      16 pC/psi (176A03)
    • Measurement Range:
      290 psi (176A03) or
      725 psi pk (176A02)

High Temperature Accessories

  • Differential Charge Amplifier

    • Model 422M182
      Sensitivity: 4 mV/pC
      Voltage Output: ±5 V pk
      Temperature Range (Operating): -51 to +85 °C
      Aluminum housing with 2-pin MIL input and BNC output connectors
    • Model 421A3X, Model EX682A40
      Sensitivity: Configurable (421A3X) or 10 mV/pC (EX682A40)
      Voltage Output: ±5 V pk (421A3X) or ±2.5 V pk (EX682A40)
      Temperature Range (Operating):
      -30 to +85 °C (421A3X) or
      -40 to +80 °C (EX682A40)
      Housing with screw terminal input and output connectors

  • Inline Charge Amplifier

    • Models 422E35, 422E36 and 422E55/D
      Sensitivity: 0.5 mV/pC (422E55/D), 1 mV/pC (422E35) or 10 mV/pC (422E36)
      Voltage Output: ±2.5 V pk
      Temperature Range (Operating): -54 to +120 °F
      Stainless steel housing with input and output connectors

  • Inline Charge Amplifier for Radiation Hardened Sensors

    • Models 422E65/A and 422E66/A
      Sensitivity: 1 mV/pC (422E65/A) or 10 mV/pC (422E66/A)
      Voltage Output: ±5 V pk
      Temperature Range (Operating): -54 to +121 °C
      Stainless steel housing with 10-32 coaxial input and output connectors

Downloads